Communicate with Supplier? Supplier
Thomas Tang Mr. Thomas Tang
What can I do for you?
Chat Now Contact Supplier

Waterproof basement concrete wall coatings

Home > Products > Polyurea Waterproof Coating > Waterproof basement concrete wall coatings
Waterproof basement concrete wall coatings
Waterproof basement concrete wall coatings
  • Waterproof basement concrete wall coatings
  • Waterproof basement concrete wall coatings

Waterproof basement concrete wall coatings

    Payment Type: L/C,T/T,Western Union
    Incoterm: FOB,CIF
    Min. Order: 800 Kilogram
    Delivery Time: 10 Days
Contact Now

Basic Info

Model No.: WWP006#

Special Services: Construction Technical Guidance

Additional Info

Packaging:  Component A: 20KG/barrel Component B: 10KG/barrel

Productivity: 1000000KG/month

Brand: UMS

Transportation: Ocean,Land

Place of Origin: GUANGNDONG

Supply Ability: 100000KG/month

Certificate: ISO9001

HS Code: 3209100000

Port: GUANGZHOU,ZHONGSHAN,SHENZHEN

Product Description

Waterproof basement concrete wall coatings

Waterproof Wall Coatings,Polymer cement-based waterproof coating for a wide range of applications, it is bathroom, bathroom and kitchen ideal for waterproofing, but also ideal for waterproofing the outer wall of the material, the same applies to the slope tile roof waterproofing, roof gutter, pressure roof waterproofing, underground Engineering and reservoir engineering waterproofing.Basement Wall Coating It can be applied to wet (or dry) masonry, concrete, metal, wood, hard plastic, glass, gypsum board, asphalt, rubber, polyurethane and Other grassroots. It can be applied to waterproofing various aspects of old and new buildings.Concrete Wall Coating

Features of Waterproof Paint

Excellent waterproofing performance

Non-toxic ideal for water tanks and other water containers

Strong adhesion to various substrate

Cement based material can connection in substrates

Weather resistant performance


Application range

Polymer composite waterproof paint is applied to most substrates, walls, facades, foundations, retaining walls, swimming pools, planters, wet room floors, water tanks, etc.

Bridge Waterproof Paint, Waterproof Paint For Bathroom, Waterproof Paint For Basement, Waterproof Roof Coating...



waterproof wall coatings


How to apply the Waterproof Paint For Concrete

1) Mix the powder material with the liquid material proportionately (The ratio of power material to liquid material is: one component: 0.8:1, two component: 1:1 by weight), then fully stir it for 3-5 minutes until it become jelly staff with no obvious particles and sediments. It would be quite appreciated if the mixing materials could be laid aside for a while before stirring.

2) Brushing on the substrate directly and completely. 2-3 coatings in total are preferred according to real application condition. Brush repeatedly to ventilate the gas if any bubble is formed when brushing. The thickness of each coating should be 0.5mm.

3) Re-coating (second coating) should be applied only after the surface dry of first coating ( touch dry , it will take 1-2 hrs at normal temperature of 25-30), the direction of brushing should be vertical to previous coating. Moisturize previous coat by spraying mist on it if it is solidified before second coating.


basement wall coating


Attentions

Ventilation equipment should be applied to speed the dry up of the coating when the application areas are damp or stuffy, especially when sealing the drinking water pool or basement.

The paint should be applied at the temperature of 5-40, but avoid application in the rainy open air.

Substrate should be firm, clean without dirt, oil stains and any other impurities. Any holes, cracks on the surface of the substrate should be pre-sealed by grouting mortar.

Moisturize the substrate before paint application but make sure no obvious droplet on it.

The stirring materials should be used up within 30 minutes.

If the mixing material is too thick, max 3% water is allowed to be added to thin the mixture.

Pre-application: Moisturize the substrate before the paint application but make sure no obvious droplet on it.

Post-application: Avoid stepping on, scratching, exposing to the rain or sunlight until the coating is fully dried and solidified.

Post-coating Maintenance: It is suggested that the coating should be sprayed mist or covered by wet cloth for 2-3 days after 24 hours of application. The maintenance processing time will be shortened if surrounding environment is well ventilated (Post-coating maintenance will further effect the waterproof performance).


Looking for ideal Waterproof Wall Coatings Manufacturer & supplier ? We have a wide selection at great prices to help you get creative. All the Basement Wall Coating are quality guaranteed. We are China Origin Factory of Concrete Wall Coating. If you have any question, please feel free to contact us.

Product Categories : Polyurea Waterproof Coating

Email to this supplier
  • Mr. Thomas Tang
  • Your message must be between 20-8000 characters

Home

Phone

Skype

Inquiry