Communicate with Supplier? Supplier
Thomas Tang Mr. Thomas Tang
What can I do for you?
Chat Now Contact Supplier

Waterproof membrane for bridge decks-Seamless film

Home > Products > Polyurea Waterproof Coating > Waterproof membrane for bridge decks-Seamless film
Waterproof membrane for bridge decks-Seamless film
Waterproof membrane for bridge decks-Seamless film
  • Waterproof membrane for bridge decks-Seamless film
  • Waterproof membrane for bridge decks-Seamless film

Waterproof membrane for bridge decks-Seamless film

    Payment Type: L/C,T/T,Western Union
    Incoterm: FOB,CIF
    Min. Order: 800 Kilogram
    Delivery Time: 18 Days
Contact Now

Basic Info

Model No.: WWP011#

Colour: Gray Or As Required

Solid Content(%): 95-100%

Theoretical Coverage: 1.0kg/m2(when Dry Film Is 900µm)

Construction Methods: Brush, Roller、airless Spraying、spraying

Main Raw Material: Polyurea, Strong Cohesion With Concrete

Additional Info

Packaging:  Component A: 20KG/barrel Component B: 10KG/barrel

Productivity: 1000000KG/month

Brand: UMS

Transportation: Ocean,Land

Place of Origin: GuangDong

Supply Ability: 100000KG/month

Certificate: ISO9001

HS Code: 3909310000

Port: Zhongshan Port,Guangzhou Port,Shanghai Port

Product Description

Armour Bridge Deck Waterproofing membrane protection board

Waterproof membrane for bridge decks-Seamless film Advantage:

● 100% solid content, solvent free environmental protection products;

● ultra-fast curing, continuous painting in any surface can not hang, a painting can reach the thickness requirements;

● Coating as a whole dense, continuous, seamless, effective solution to the membrane type waterproof material splicing common problem;

● Very high coating strength, toughness, impact resistance, tear resistance, corrosion resistance, wear resistance, puncture resistance, aging resistance, is a permanent water-blocking protective layer, can be exposed to use.

● Construction is simple and convenient, you can brush coating can also be sprayed equipment, coating can be quickly put into use.

Application

Concrete, brick and mortar wall surface and floor. Waterproof Paint For Basement and Bridge Waterproof Paint. Foundation of building, tunnel, Kitchen, Waterproof Paint For Bathroom.


Solutions Recommend:


bridge deck waterproofing membrane systems-Solution 1

Features of Waterproof Paint

1. Color: Green, Blue, Customized.

2. Excellent water-resistance and can be used for long-term immersion environment.

3. Color paint, visible waterproof effect.

4. Apply directly in wet substrate.

5. Firmly attach to the substrate, high bonding strength.

6. The Bridge Waterproof Paint will permeate the substrate to block up all the micropores on the purpose of avoiding leakage.

7. Excellent flexibility performance against slight architect vibration or small splits caused by different reasons.

8. Non-toxic and anti-volatility.


bridge deck waterproofing membrane systems-Solution 1

NO. Name of products or Process Layers Dry film thickness(um)
1 Concrete surface treatment

2 KH-7 Concrete special primer 1 50
3 T100 Polyurea waterproof paint 1 600-2000
4 Paving asphalt or concrete as a protective layer

Total
2 650-2050

bridge deck waterproofing membrane systems-Solution 2

bridge deck waterproofing membrane systems-Solution 2

NO. Name of products or Process Layers Dry film thickness(um)
1 Concrete surface treatment

2 KH-7 Concrete special primer 1 50
3 T100 Polyurea waterproof paint 1 600-2000
4 T200 Polyurea waterproof paint ( Outdoor naked selection) 1 100-200
Total
3 750-2250

bridge waterproofing membrane

tunnel waterproofing systems


How to use Waterproof Paint For Concrete

1) Mix the powder material with the liquid material proportionately (The ratio of power material to liquid material is 25:17 by weight), then fully stir for 3-5 minutes until it become uniform jelly staff with no obvious particles and sediments. It would be quite appreciated if the mixture could be laid aside for a while before stirring.

2) Brushing on the substrate directly and completely. 2-3 coatings in total are preferred according to real application condition. Brush repeatedly to ventilate the gas if any bubble is formed when brushing. The thickness of each coating should be 0.5mm

3) Re-coating (second coating) should be applied only after the surface dry of the first coating ( touch dry , it will take 1-2 hrs at normal temperature of 25-30), the direction of brushing should be vertical to the previous coating. Moisturize the previous coat by spraying mist on it if it is solidified before second coating.


Looking for ideal Bridge Waterproof Membrane Manufacturer & supplier ? We have a wide selection at great prices to help you get creative. All the Waterproof Membrane for Bridge Decks are quality guaranteed. We are China Origin Factory of Bridge Waterproofing Membrane. If you have any question, please feel free to contact us.

Product Categories : Polyurea Waterproof Coating

Email to this supplier
  • Mr. Thomas Tang
  • Your message must be between 20-8000 characters

Home

Phone

Skype

Inquiry